Both A and B engine race parts
Selling some misc 'inventory' that I don't anticipate using in the near future. I do have other related items so, you might inquire with specific needs.
1)Complete minus carb (includes dry sump system, new motor plate, alternator) Craftsman-truck 9.5:1 358" r3/w8 It was rebuilt and then dynoed only then sat for years before purchased. the upper end is removed for inspection. $9500
2)MP '360' ductile caps $150 PENDING
3)1970 440 block std bore Bushed lifter bores, Alloy caps, partial fill (Needs bore, caps fit, deck) $900
4)USED 440-1 TD shaft rockers (bought used so, need some parts) but will work well after on small roller cam application $600
5)'451' rotating assy needs crank machining: RB 440 crank (never raced-on core) NEW bulletproof BME'426' 6.76 mopar bearing rods, 4.375" JE 1.29 C/H pistons (LOW USE) with edelbrock head domes (Can be milled flat-top) std main clevite bearings $1350
6)NEW Comp roller (can make over 800HP) .730ish lift with 1.5 rocker $425
7)NEW Crane roller lifters "B" engine (old-school direct connection) $250 (PENDING)
8)Comp roller lifters "B" pushrod oil (I believe #944 AMC) 904/810 wheel 13-14 pairs (VERY Low-use motor issues) and reinspected good by me with sheet. $400.
9) NEW Milodon bronze dist drive gear/shaft (long version) $125.
Michigan 48316 Shipping cost is additional. Sean or PM here Please be respectful of my time.
Selling some misc 'inventory' that I don't anticipate using in the near future. I do have other related items so, you might inquire with specific needs.
1)Complete minus carb (includes dry sump system, new motor plate, alternator) Craftsman-truck 9.5:1 358" r3/w8 It was rebuilt and then dynoed only then sat for years before purchased. the upper end is removed for inspection. $9500
2)MP '360' ductile caps $150 PENDING
3)1970 440 block std bore Bushed lifter bores, Alloy caps, partial fill (Needs bore, caps fit, deck) $900
4)USED 440-1 TD shaft rockers (bought used so, need some parts) but will work well after on small roller cam application $600
5)'451' rotating assy needs crank machining: RB 440 crank (never raced-on core) NEW bulletproof BME'426' 6.76 mopar bearing rods, 4.375" JE 1.29 C/H pistons (LOW USE) with edelbrock head domes (Can be milled flat-top) std main clevite bearings $1350
6)NEW Comp roller (can make over 800HP) .730ish lift with 1.5 rocker $425
7)NEW Crane roller lifters "B" engine (old-school direct connection) $250 (PENDING)
8)Comp roller lifters "B" pushrod oil (I believe #944 AMC) 904/810 wheel 13-14 pairs (VERY Low-use motor issues) and reinspected good by me with sheet. $400.
9) NEW Milodon bronze dist drive gear/shaft (long version) $125.
Michigan 48316 Shipping cost is additional. Sean or PM here Please be respectful of my time.