NEED HELP,FUEL PUMP BOLT ISSUE,LEAKS OIL
You would think if they used a short bolt, that 1/2 the threads would still be in the aluminum timing chain cover yet.
Like one guy was saying you could reach around the corner to catch the Rinse from Brake Parts Cleaner with a shop wrag.
Then with it clean JB weld a repair stud permanently into the 1/2 stripped hole. Can reach around the corner and wipe off any JB weld if it gets by to the inside before it sets up.
Let cure overnight, assemble and go.
Or just a straight repair stud of the proper thread Size and Length.
You would think if they used a short bolt, that 1/2 the threads would still be in the aluminum timing chain cover yet.
Like one guy was saying you could reach around the corner to catch the Rinse from Brake Parts Cleaner with a shop wrag.
Then with it clean JB weld a repair stud permanently into the 1/2 stripped hole. Can reach around the corner and wipe off any JB weld if it gets by to the inside before it sets up.
Let cure overnight, assemble and go.
Or just a straight repair stud of the proper thread Size and Length.
