Any advice on my 440 recipe?

Hey All,

About at the point of ordering up a bunch of parts. This is my first engine build. Pretty mild. Can you please chime in with any advice some of you experienced builders see on this? It’s going in a Dart.

78 Motorhome 440
-Previously bored .030 over (not sure on piston specs)
-New rings, main, rod bearings
-Hughes Whiplash cam .518 lift 232/245 duration
-Stock 452 heads with Hughes springs
-Performer RPM Intake
-2,500 stall torque converter (not 100% sure on brand/model, still researching, recommendations would be great, not looking to spend over $600. Hughes recommends stock TC but I have seen posts recommending a bit higher?)
-High pressure oil pump
-High volume fuel pump
-Street Demon 750cfm carb
-3.73 rear end
-275/60/15 rear tires
-Schumacher headers
-Pypes Street Pro 2.5” exhaust with H pipe

Please let me know if I am missing any information.

Mainly looking for good, very peppy street manners, will be cruising about 50-60 mph often. Might see the strip once or twice a year.