Looking for some incite and suggestions on going with 1.5 or 1.6 rockers to give a little extra lift to my current cam since I’ll be updating to speedmaster heads, 2.02/1.6 65cc port/polish, machine for larger pushrod/clearances to accommodate 1.6’s. Looking at using Hughes Engines rockers.
Planning to use .040 Felpro 1008 head gaskets
Cam- Crane 150062
3,000-6,000
228int/228exh @ .050
.480int/.480exh lift factory ratio
112 LSA
Speed pro forged pistons, .030 over
Slightly above deck
Eddy air gap
3.55 suregrip
4spd
Hedman LT headers
