MS3 , Multiport & turbo build
I will try and answer this as best as I can. the coils are mounted to the inner fender using modified aftermarket LS coil mounts. I am running a 36-1 wheel on the crank with a home made mount welded to the timing cover ( similar to Matt@DIY made ).
for the cam I have a modified Jeep Cam position sensor ( shortened the shaft and installed the slant distributor gear ).
I will try and answer this as best as I can. the coils are mounted to the inner fender using modified aftermarket LS coil mounts. I am running a 36-1 wheel on the crank with a home made mount welded to the timing cover ( similar to Matt@DIY made ).
for the cam I have a modified Jeep Cam position sensor ( shortened the shaft and installed the slant distributor gear ).
