1967 273 single and dual point primary leads
Hi all,
I'm rebuilding a dual point distributer and need the primary leads, from coil to the points.
I have seen 2 versions, one is a combo lead. It goes from the coil through the dist wall then to one point than to the other point.
The other version looks like it goes from the coil through the dist wall then to one point than a seperate jumper goes from one point to the other.
This is the jumper, the lead to the coil would look like a single point lead.
I have also seen total length from 8 inches (seems short) to 12+ inches.
If course in the process of measuring my stock single point primary leads the insulation cracked in numerous locations. aaaaarrrrrgggg!
Let me know what you have, as long as the insulation is soft and the lengths and connectors are good I'm interested.
If the coil end has been cut I can deal with that as long as the total lengthen is good.
Hi all,
I'm rebuilding a dual point distributer and need the primary leads, from coil to the points.
I have seen 2 versions, one is a combo lead. It goes from the coil through the dist wall then to one point than to the other point.
The other version looks like it goes from the coil through the dist wall then to one point than a seperate jumper goes from one point to the other.
This is the jumper, the lead to the coil would look like a single point lead.
I have also seen total length from 8 inches (seems short) to 12+ inches.
If course in the process of measuring my stock single point primary leads the insulation cracked in numerous locations. aaaaarrrrrgggg!
Let me know what you have, as long as the insulation is soft and the lengths and connectors are good I'm interested.
If the coil end has been cut I can deal with that as long as the total lengthen is good.