Gauging interest in making new alternator voltage regulators

Comments:
How would it work with a plastic box?

Every wire modification made is a potential source of failure. With no way to control the quality of the wire connectors needed to use this customized unit, it opens you up to failure complaints, whether fairly placed or not.

Problems with the regulators at least in part are due to the high field current many of the new replacement alternators draw. A regulator that could handle the load would be a partial answer and probably welcome. That still wouldn't resolve issues caused by the load on the rest of the circuit. Arguabley the best answer for most owners is to use an alternator with field current that is in spec.