Mounting Thermoquad to air gap style intake. What adapter?

Thanks for thinking this through AJ. Just to clear things up, I am running a 5.9 Magnum .030 (the LA I previously removed) and 904 with 3.55's.
TC is a 2500 stall all wrapped up in a 72 B body. Also running long tube headers with 2.5 plus H pipe.
I am considering 4.10s with a 518 and higher stall in the future but not right now.
Still not sure about the TQ and the spacer/adapter recommended by lemondana in another thread may be too tall. The engine is fresh so I don't really want to swap the intake at this point. The AC makes it a pita and I had to fabricate brackets for that and the throttle/kickdown.
Leaning towards the AVS2 at this point. Car is an all around driver on highway, town and twisties but I do like to hammer it.