360 LA getting oil in #3 cylinder.

Thanks. I believe the head gasket was already blown when my brother in law bought it. At idle there was a little smoke coming out of the valve cover breather. There car has a lopey cam and fairly loud exhaust but it sounded pretty good. I drove it to his house and it felt like it had pretty good power but there were some vibrations that seemed to come and go at different speeds and seemed to smooth out when the mashing the gas pedal down. The transmission wasn't shifting properly so there was lots to sort out in 12 miles.

View attachment 1716058537

View attachment 1716058538

View attachment 1716058536The previous owner had adjusted the timing with an old timing light that I read somewhere may not work with MSD. I got a new MSD timing light and initial timing is 10° but I don't know where all it could have been. I have a new MSD timing tape to install on the balancer. The MSD distributor doesn't appear to me to have any advance built in. I'm guessing it must be in the MSD ignition control box which I am not yet familiar with.
In the msd's advance plate there is an advance bushing. Black is the shortest @18*.. I reccomend you make one from a small nut...and with a nice course nicolson file and some vice grips..dial it to just fit 'pill shape or oval'. Test and see what it gives you...then file a little off if necessary. That's what I have done for many years.