9 old tools almost nobody uses anymore
https://www.forabodiesonly.com/mopa...-and-alignment-questions-for-the-pros.390250/
I also bought an electronic Hunter alignment machine, which I hoped "housed" a DOS computer that I could simplify. This early model instead, had a very very proprietary, clumsy, heavy computer setup that was all or nothing. Basically what I came out of there with, was some wheel clamp units, that I cam going to modify (remove the electronics modules) and behind them are actually plates that will accomodate a universal, magnetic caster/ camber gauge.
I may have those exact ones. My toe setup I cannot use. It is some light projecting/ mirror/ magnifier deal that is magnetic, and won't stay on the spindles, heavy and cumbersome. I bought a trammel setup off egag that turned out to be for heavy trucks, had to cut it down to get it under the Dart LOL. I don't have a shop, so I jacked and blocked the car trailer level and used that for a "rack."
https://www.forabodiesonly.com/mopa...-and-alignment-questions-for-the-pros.390250/
I also bought an electronic Hunter alignment machine, which I hoped "housed" a DOS computer that I could simplify. This early model instead, had a very very proprietary, clumsy, heavy computer setup that was all or nothing. Basically what I came out of there with, was some wheel clamp units, that I cam going to modify (remove the electronics modules) and behind them are actually plates that will accomodate a universal, magnetic caster/ camber gauge.
