steering problem

loosen the bolts on the cross mount under the dash and heave the whole caseing about
if need be you might need to disconnect at the pot coupler as well or loosen the steering box bolts

the plate has big holes so it can be moved to where it wants to go
the bolts, bolt through to captive nuts as far as i can tell


so unless you have the wrong one or its on backwards (is that possible) or the car has had the kind of impact that makes 1 side shorter than the other. fitting just takes a bit of fiddling about

this plate will need to be done up first then do the under dash mounting which has elongated holes to help

if this upper mount is done up tight first you can't move the lower mounting about very much to find the bolt holes

Dave