Let's talk G3 hemi cams

Let's get this thread rolling again. I ordered a cam this morning. Was leaning towards a Comp HRT but decided to stay local with Cam Motion.

GRIND# XA220/360-XA227/350-14+4
Hydraulic Roller Camshaft
Performance
Duration at .050": 220/227
114 Lobe Separation Angle
110 Intake Centerline
Lift with 1.65 Rocker Arm Ratio: .594"/.577"
Recommended Displacement: 5.7-6.1 Liter Engines
Recommended Compression Ratio: 9.0-10.8:1
Recommended Headers: Stock Manifolds to 1 3/4"
Recommended Stall Converter: Stock to 3200
Recommended Rear Axle Ratio: Stock to 3.92:1

I have my Eagles back from the machine shop. All of the valves were worn down about 20 thou on the valve stem tip so all new valves. Did a little work on the roof of the exhaust port as mentioned above and just did a general light touch up everywhere. I am going to use the 6.4 intake with SRT shorties. I also lucked onto a set of the Stainless Works cat delete pipes for half price. Cam will be 3 or 4 weeks out. I also checked with the guy who tuned my car and he had no problem with my plans.