TF 727 Push-button Output Hub Converting to U-Joints

446acuda said

I'm not too familiar with 727s with flanges but don't some of the later bolt-on yokes like used in trucks and motorhomes shorty 727 have the same spline? If so, those might be easier to work with for what you are doing.

Click to expand...

Thanks. I already looked into the RV flange, but unfortunately the splines are much finer than the 1963 - (some) 1965. I didn't go further in seeing if the shaft OD and the flange OD where it rides on the seal are the same OD, but they look larger. It would have been a slick swap if everything was the same.