NEW 360 LA CRATE TEARDOWN
Confusion indeed!
I have two different mopar catalogues with the same P4876908 part number.
the only difference being pin height.
Crate engine catalog states this block is 10:1 comp with cast heads (587 or 596)
The 2005 mp catalogue says 9.1:1 with the same heads.
The only difference being pin height.
My calculations tell me Im in the 9’s for compression due to the pistons at top being in the hole a c hair.
About .024 in the hole.
Maybe the Cummins built here in Canader had lower compression?
Confusion indeed!
I have two different mopar catalogues with the same P4876908 part number.
the only difference being pin height.
Crate engine catalog states this block is 10:1 comp with cast heads (587 or 596)
The 2005 mp catalogue says 9.1:1 with the same heads.
The only difference being pin height.
My calculations tell me Im in the 9’s for compression due to the pistons at top being in the hole a c hair.
About .024 in the hole.
Maybe the Cummins built here in Canader had lower compression?
