HOME MADE EXHAUST

Well... I did mine on my back with the car on 4 jack stands , i have many Jack stands... so I used the small ones to support the pipes ever so far apart down the line. Once i have it all cut and slipped n tucked to the bottom nicely... I used a marker to draw a alignment stripe.. mostly I spot welded them and let them down to fully weld up. I welded the over axle portions in place...kind of a tense feeling...gas tank.. I got the tails on and aligned by attaching the brackets to them straight and at the right distance/height apart n to the bumper. ..then welded them the over axle portions. I used the 3" jegs mandrel bent kit. Great kit. Went with dynomax ultraflows fwiw.