Starter clicks using the key, engine starts by jumpering the relay

So here is what we know.

1. No wiring changes till after the problem came to a head.
2. With right turn signal on the key will crank the engine and start but it won't stay running.

Now we know the following is good

1. The starter works fine.
2. The starter solenoid works fine
3. The starter relay works fine
4. The NSS cir works fine.

Problem...

1. The key should not require the turn signal to be on to start.
2. With the key in the run position and the turn signal on there is no power to the ignition.

I suspect that with the previous "giggle wires under the dash" allowed the engine to start that there are bad connections and maybe shorted wires under there.