5x4 Bolt Pattern Aftermarket Options

Looking at possibly going with 14" Rallye wheels for the 67 Barracuda. Anyone know if these were made/or are being made in an 8" width with something around a 4" +/- 0.25" back set and a 6" width with around 3-3/8" back set? I have seen 14" x 8" Rallye's offered by Coker but they have a 4-5/8" back set. 14" x 7 " had 4-1/4" back set and 14" x 6" had 4" back set.

I think 4" back set is as close to the springs as I am comfortable being. Using a 235/60/14 I think that would leave about 5/8" gap between tire side wall and springs on an 8" wheel plus accounting for some tire bulge past the wheel.

I prefer an 8" wheel with a 4" or 3-3/4" back set, in case I might want to step up to a 245/60 in the future but if there aren't any of the 14" Rallye's made in the 8" with the lesser back set, I may have to just go with the 7": 4-1/4" back set. I might entertain running a 1/4" spacer but not crazy about going thicker than that. I don't want to have to move the springs.

Anyone know if someone has made or is making the 14" x 8" Rallye's in 3-3/4" to 4" back set? I am looking at Rallye's utilizing the rings and center caps.


Thanks