Tuning Street Demon carb

Update... I took the carb off and pulled it apart for the eleventy-billionth time lol. Blew out the secondary metering passages backwards with carb cleaner but didn't see any junk come out so I swapped the #88 secondary jets for #92s, cleaned it all and put it back together. I also pulled the old fuel filter and there was definitely some debris that dribbled out when I shook out the inlet end over the ground. Installed new fuel filter with new rubber lines between the metal lines; I got the rubber part onto the metal line going to the carb first and then blew it out with carb cleaner to make sure no rubber shavings were left in there. It's all back together now but we'll have to wait until tomorrow to fire it up as it's midnight and raining here and it's supposed to rain most of tomorrow morning, I'll report back after I go for a test drive. Trying not to drive the car in rain as there are a few water leaks into the trunk that I need to fix and remove the rust that's starting to form on the trunk pan.