Another riding lawn mower what did i break on it question....

One again--I sit here with no wiring diagram. Generally, there can be several switches that kill ignition and or starter circuit "for safety. First thing to do is find the mag kill wire right where it enters the mag and temporarily disconnect that. This will separate the problem. Then determine why it won't crank. You will at least have a clutch switch, a neutral switch, and possibly a seat switch. These could be either in the crank wire circuit going to the solenoid, or in the grounding side circuit. Disconnect either of the two small solenoid connections (if it has two) and monitor one and then the other with a meter/ test lamp and see if you get a "crank signal.