Bullitt wheel information

Looks good, I like it.

Why run the Jeep axle? I run an F-Body 8.25" with an earlier set of 17x8 Mustang wheels with the 30mm offset (5.681BS) and 245/45R17 tires all the way around. I do run a set of slip on Cobra rotors on the front and GC rotors on the rear which is effectively like running a 1/4" (or so) spacer. The front would need a spacer otherwise to keep it off the tie rod end, but don't remember if the rear would be an issue without the rotor.

Not knocking your solution, just curious if the Jeep axle was a necessity.