THERMOQUAD INFORMATION>>>>>>>>>>>>>>>
Performance Mods I have heard/seen/read
Remove choke tower for 50 cfm more
Use a TQ with the fuel inlet in the center of the lid, drill out the fuel passages for more fuel
Use of Holley jets
Modify AFB/AVS metering rods to fit
TQ
Insure the secondary air flap is at the correct angle at WOT
Remove the lower primary booster rings
Use of a leather accelerator pump
Increase size of fuel/air bleed ?????
Float levels critical
Cutting a section of the metering rod piston spring for applications with low vacuum
Others ?????