Anyone local to me capable of correcting errors on a 904 race build

Duane said

How do we know that it wasn’t his new local builder who stripped the threads. Maybe he had his 200ft lb impact on tighten instead of loosen. Too many hands in there now to keep blaming Cope. The new builder also rebuilt it after all and it still has issues.
He says the pressures are not right. What is the pressure. This is a transbrake tranny.
Probably at least 170 or more. Not specific
Enough.

Click to expand...

I can see your a big fan of John Copes ..


I know enough to tell you this , the transmission was a complete pile of junk , it now is fixed and we will test it when I can find a spot to drive it safe enough to see how it works

Without the local builders help it would still be in a ground of pile of junk , he was extremely Helpful and accommodating.

Much different than the original builder was / is ..No way I would send it back to that butcher


I have a witness, on this board that posts here to tell you about John Copes work but, I won't name him so he might want to stay out of the limelight

tailshft bolts on leaking transmission are now heilcoiled