Early Abody Doug’s 450 header install BEFORE engine going in
You will need an oil filter adapter. Here is how I installed the 273 in my 66 Barracuda.
Kframe up it is tight leave the rubber mount nuts loose so you can push the engine over left or right as you lower the car on the assembly. It has worked a 100% easier than dropping them in from the top. Both ways work but if the engine is out of the car with the k frame then do it like the factory did. Syleng1
Kframe up it is tight leave the rubber mount nuts loose so you can push the engine over left or right as you lower the car on the assembly. It has worked a 100% easier than dropping them in from the top. Both ways work but if the engine is out of the car with the k frame then do it like the factory did. Syleng1
