Electric choke wire hookup

I understand that this choke power question is no longer a question but, I wanted to share a tidbit of information that is rarely recognized.
In later models (I forget what year this began) where the radios power connector has a red or pink wire supplying 12 volts, you will find a white wire in with that 12 supply wire. So the white wire is to carry 12 volts to the turn signal switch connector. The problem with that is there is already a white wire in the turn signal switch connector that comes from the brake lamp switch. 2 white wires of same gauge would just cause confusion.
The engineers needed to take the white wire to some terminal to change its color. Least expensive location was one of the female packard terminals in the bulkhead connector. The white wire goes there to join a black wire to continue on to the turn signal switch connector. There is no male parkard terminal on the engine side of this bulkhead connector port. Adding a male terminal with any color wire here gets us another swiched 12 volt source in the engine bay.