LA Cam Swap In A Magnum?
Got ya. I thought you might be suggesting a Crane Hyd for some reason lol. Not that it would a bad thing... What are running for pistons?
Oh no! Run what you think or have for sure!
I happen to have a NOS Crane Hyd I picked up here years ago and now is the time. The 5.9 is a stock long block. It has a Chink intake, 750 AFB, Summit Racing 1-5/8 headers into there X pipe and will use there turbo mufflers all @ 2-1/2 ending at the axle for now. The cam is one of Crane’s special cams I think we’re designed for bracket racing with these specs.
@.050-236/236-.497/.497-108 The amount of overlap at this moment escapees me. I’ll have to check the cam card and see if it’s listed.
I think the compression is a little light, and the 108 could be moved down to a 106 for as it sits now, but it’ll be OK. A 2.02 valve would be better. Ether way, bracket engine or street engine, this will be a good cam and a reasonable package to enjoy while I put together the bracket engine for the Duster.
A bunch of Cranes cams were lift limited for some reason as if the cylinder heads could not be ported.
Do you know all of your cam specs by chance?
