California Flash
The drivers side mount pictured above is an early version, current mount pictured below is very similar but uses all four mount holes.
yes....the HDK Gen III Hemi engine mount is designed to utilize OEM A/C compressor while allowing use of the same K for all the popular Mopar engines from 6 cyl, 273-318 / 340-360 small blocks, B / RB big blocks, 66-72 Stage II Hemi and the 5.7 /6.1 / 6.2 / 6.4 Gen III Hemi. Note: the OEM oil cooler on the 6.2 and 6.4 has to be removed for mount clearance.
The drivers side mount pictured above is an early version, current mount pictured below is very similar but uses all four mount holes.
