1970 "DUPED" Dart Swinger
I guess the P.O. didn't think the seal and cover was important on the steering column end. The boys and I replaced that today. I used a puller to pull the cover down and a clamp to keep it tight. It worked really well and it's nice and tight.
The number 7 header tube is not allowing the column to go in correctly. I have a few sets of shims from Schumaker I am going to shim the driver side of the motor up a bit and see if I get better access. I knew this was going to be an issue because it was hitting the tube when turning the wheel.
I guess the P.O. didn't think the seal and cover was important on the steering column end. The boys and I replaced that today. I used a puller to pull the cover down and a clamp to keep it tight. It worked really well and it's nice and tight.
The number 7 header tube is not allowing the column to go in correctly. I have a few sets of shims from Schumaker I am going to shim the driver side of the motor up a bit and see if I get better access. I knew this was going to be an issue because it was hitting the tube when turning the wheel.