Clutch pedal sticks

My problem is, when I push the clutch in it will go all the way to the floor just as it should but when I let off of it, it will only come back up halfway. Then I have to pull it the rest of the way back up with my foot. It’s almost like it’s got a spot about halfway up that it sticks.
FWIW, The OC spring works in both directions of the pedal with a B&B setup.
Pushing the pedal down, the OC spring assists you (your leg) in compressing the plate springs to release the disc once its "over center".
As you let off the pedal the OC spring lifts the pedal up to the stop once the plate springs have pushed it back "over center".

I’ll remove the spring on the clutch pedal and I’ll let everyone know if it works. Thanks again for all your help
Let us know where your pedal rests after you remove the OC spring.