Forgot to post previously. New transmission is in and everything is running great. The converter is very tight. Stalls around 2800, and flashes to 4000 rpm running hy-gard fluid. I will likely thin out the fluid with some ATF +4 to loosen the stall up just a bit.
I’ve done a couple 1/8 mile draggy runs and mph is 100-101 at a very conservative 10psi and 20° timing. I’m just under 9:1 compression and plan to run 15-16psi on pump fuel.
The turbo is DEAD silent which I cannot stand so I’m also upgrading to an anti surge housing. I hope to get at least a little sound out of this 78mm
View attachment 1716113779
View attachment 1716113781
