After following the instructions and installing the cable and hooking everything up at the transmission, I noticed that with the Holly wide open, I'm about 1-in short. Is there something I'm missing for the Holly a bracket or something. I know the accelerator cable is not correct but I'm not using that bracket. I have one that's mounted off of the stud from the carburetor. Any help would be appreciated
It appears to me that whoever had the car before you must of cut the cable. I am speaking of the inner cable. It is normally much longer in length, as I have installed these units on other cars we have built. You should be able to buy a new inner cable from Lokar. Goof luck with your project!
