My 340/420 Stroker Build

YO7_A66 said

Thanks guys.
I have the later Weiand 7545 and thank you for posting that cam info and I do believe I know which member is running that cam.

This car is a streeter and the two solids that I have spec’d so far fall in between 247-250 and 252-254 with final lifts around .580” to .618” after lash and apx geometry loss with my 1.65 rockers.
But I will stay open for suggestions as I have a few more weeks before I order the cam.

Thanks again!

Click to expand...

The intake is a Weiand Excellerator? (If you can have it ported, do so!) What size carb will be employed? What mufflers? Who’s stroker kit?

I think your cam duration numbers are right in the ball park w/3.91 gears. I myself wouldn’t look any higher that that [email protected] intake. The converter will not be the best but it will work well for the street just fine enough. IF you dyno it, send in the dyno sheet with the converter to be reflashed. A dyno sheet seals it. My guy asked for one. Since I had none, not that it was a stretch for his mind, I gave him everything detail to everything about the engine, trans, rear gear and tires as well as weight of the car and what it is for and expected.

My guy Joe so “Nailed it!”