Been a week of collecting parts and information.
My friend at the machine shop and I went halves on a 55 331 Hemi a while back figuring we would probably turn it and make a few bucks. We pulled the heads to verify bore size (it’s standard) and set it aside till a buyer comes along. Note to self……. “storing” parts at a machine shop is not necessarily the best solution.
]
View attachment 1716123310Parts Pile[/url] by https://www.flickr.com/photos/153889607@N08/]M Patterson[/url], on Flickr
Anyway he got it on a stand for me, and I’ll finish the teardown next week and just bring the bare block and a couple of heads over to my shop for mock up.
]View attachment 1716123311MU 331[/url] by https://www.flickr.com/photos/153889607@N08/]M Patterson[/url], on Flickr
I’ll also be borrowing a 46 RH/RE case and Overdrive housing from a friend at the transmission shop sometime next week.
At some point I’m going to want a stock hood, heater, maybe a trunk lid (rather than repairing the hole for the power cut off switch) and probably other miscellaneous pieces. I went and looked at another 68 Valiant I’d passed on earlier and decided it would be handy to have around so I bought it. There’s no motor or transmission and a couple of front replacement floor pans are just screwed in but overall it’s solid and pretty straight. Added plus it has a clear title which I transferred this Friday. The only real difference between the 2 cars when they were new is the Green car came out of Detroit and the red car was assembled in the LA plant. Another plus is I found both cars within 5 miles from where I live.
]View attachment 17161233121968 PC[/url] by https://www.flickr.com/photos/153889607@N08/]M Patterson[/url], on Flickr
The seller had originally intended to build it as a race car, but ended up finding a Nova instead so this one went up for sale. At least I saved it from a SB Chevy swap. It’s a small bolt pattern car but comes with the pieces to convert the front to 5 on 4 ½ disc brakes and a few other odds and ends like the bumpers, grills and trim.
Now that I have this car, I’m seriously thinking that I’ll use it for the mockup instead of taking the BB Valiant apart for now. Once I get everything sorted out I’ll transfer the stuff to the Green car, which should at that point turn into a pretty straight forward swap.
Still looking for an original 392 HEMI/354 Poly passenger car oil pan. They’re center sump. It shouldn’t be too bad to build one if I have to, but would prefer not to.
I’ve got some ideas on the exhaust but that will have to wait until I have the engine at least partially in the car.
