65 barracuda interior metal and trim steps
Not sure if you are using your old sail panel backing or not, But that has to go in first and must be trimmed so the metal trim can fit over it. I have a bunch of pictures that I had taken when I did my interior.
Sail panel glued in. Now you have to put the metal trim against it to trim away excess.
Use the metal trim to make a line of where to trim.
Trim this part off. Then the metal trim will fit once your headliner is in.
This must be done before rear seat metal trim above door panel goes on. Headliner must be in place.
Not the best picture but you can see headliner is tucked in upper metal trim that goes above door panel.
Hope this helps, sometimes my memory does get a bit foggy. I have lots of pictures but no part numbers for you.
Not sure if you are using your old sail panel backing or not, But that has to go in first and must be trimmed so the metal trim can fit over it. I have a bunch of pictures that I had taken when I did my interior.
Sail panel glued in. Now you have to put the metal trim against it to trim away excess.
Use the metal trim to make a line of where to trim.
Trim this part off. Then the metal trim will fit once your headliner is in.
This must be done before rear seat metal trim above door panel goes on. Headliner must be in place.
Not the best picture but you can see headliner is tucked in upper metal trim that goes above door panel.
Hope this helps, sometimes my memory does get a bit foggy. I have lots of pictures but no part numbers for you.