Street 360 W/.528" P.S. Cam
Bewy a 98 LSA may make great horsepower on an engine dyno contest but what would it be like in a street car around town in a manual especially.
I have a custom cam in my 410 by mike @ B3 engineering and it is a 238/242 on a 112 LSA with 610 lift and it will pull away in fourth gear without a hicup under one thousand revs .
No bucking or jumping and a pleasure for an old man like me to drive. it makes 424RWHP and at 1500 revs in second gear, when you put the throttle to the floor it goes insane ! Tach immediately goes to 6500 rpm and is sideways with wheelspin. The dyno sheet shows a slight drop in torque at low revs but on the road does not show up compared to my old can which was on a 110 lsa and has slightly less duration and a lot less lift.
Engine dyno comps do not equate to real world driving!
