273 blower cam
Here's what a plunge cut with a stick welder looks like. Granted this was a cheap dual exhaust I had a shop install 20 years ago I can't complain too much. Mufflers are flowtech raptors which I really like, but could never see what they were because they installed them with the logos facing the floor and 100% welded in place.
I asked for 2 1/4" exhaust and they did 2 1/4" to the mufflers, 2" behind the mufflers, and 1 7/8" h-pipe.
Eventually probably replace everything with 2 1/2 stainless as welding dirty old metal really kills the tungstens
Everything getting tig welded v-bands so I can actually work on it without squeezing between pipes.
Gunna grind these anti-reversion baffles out a smidge. Lol
Here's what a plunge cut with a stick welder looks like. Granted this was a cheap dual exhaust I had a shop install 20 years ago I can't complain too much. Mufflers are flowtech raptors which I really like, but could never see what they were because they installed them with the logos facing the floor and 100% welded in place.
I asked for 2 1/4" exhaust and they did 2 1/4" to the mufflers, 2" behind the mufflers, and 1 7/8" h-pipe.
Eventually probably replace everything with 2 1/2 stainless as welding dirty old metal really kills the tungstens
Everything getting tig welded v-bands so I can actually work on it without squeezing between pipes.
Gunna grind these anti-reversion baffles out a smidge. Lol
