Magnum intake drilling plate project

Siciliano15 said
I definitely understand about lending to someone with one post. That's crazy that the guy won't give the jig back it's like he has a lack of humanity and courtesy for his fellow mopar people.

I would use the intake you said but it's for a 2002 Dakota 5.9 with the factory fuel injection so I need to use the magnum intake which has the injector bosses already.

If using the keg intake I would drill out each hole and install steel sleeves because drill bit will cut into the aluminum. Do ends first then install a bolt to hold the intake square and not slip around. Intake should lay flat against the heads. Run the tap though the intake hole also to keep them straight