'69 Barracuda T56 swap, floor, cross member
Welded up the cuts that were made in firewall tunnel in order to enlarge it. Then did a test fit with the Quick Time bellhousing. The tightest spot is that bolt in center of trans but a 1/4 inch hose slides between bolt and floor without any drag. Clearance looks good everywhere else. So I think I finally have sufficient clearance now.
Welded up the cuts that were made in firewall tunnel in order to enlarge it. Then did a test fit with the Quick Time bellhousing. The tightest spot is that bolt in center of trans but a 1/4 inch hose slides between bolt and floor without any drag. Clearance looks good everywhere else. So I think I finally have sufficient clearance now.