Classic auto air install 1970 Duster with 340 and Edebrock Super Victor EFI Manifold
The add-on pulley is a bit strange with only the 3 bolts and having 3 bolts behind it.
Finished home made bracket.
Installed pipes and reciever/drier. You have to drill holes for it but they provide nuts and bolts, I had to add my own washers on the rubber isolators
Pressure switch isn't in a very good place, my grille is broken for the bulb holder for the turn signal but it would be hard against the wire.
I had to make new fuel lines for the front fuel rails and go to steel around the compressor because of the lack of space for my braided hose.
26" radiator back in and contour fans back in, my overflow tank no longer worked so I have another on order.
All buttoned up for the brackets and the belts are all installed
The add-on pulley is a bit strange with only the 3 bolts and having 3 bolts behind it.
Finished home made bracket.
Installed pipes and reciever/drier. You have to drill holes for it but they provide nuts and bolts, I had to add my own washers on the rubber isolators
Pressure switch isn't in a very good place, my grille is broken for the bulb holder for the turn signal but it would be hard against the wire.
I had to make new fuel lines for the front fuel rails and go to steel around the compressor because of the lack of space for my braided hose.
26" radiator back in and contour fans back in, my overflow tank no longer worked so I have another on order.
All buttoned up for the brackets and the belts are all installed
