9in help
I have this exact axle in my duster. The width is 56” flange to flange which is a little over an inch narrower than a factory 8 3/4.
First off, speedway’s description is wrong. It is not a fabricated housing. The 2nd picture shows you what it should look like. I ended up not using the fabricated housing in the pic because it’s 54” flange to flange.
Let me know if you have any questions. I built mine from end to end several times so I’m pretty sure I have all the answers…. lol
![IMG_0318.jpeg IMG_0318.jpeg](https://www.forabodiesonly.com/mopar/attachments/img_0318-jpeg.1716166595/)