1/4 Mile Dart Cam Selection

BHB4408 said
Help with Cam Selection on 440 Dart? I have a race only 72 Dodge Dart, 3200 lbs with driver. I am building a 40 Over 440 with a 512 Stroker Rotating Assembly from 440 Source including their lightweight crankshaft, Trickflow 270 Heads, 10.8 Compression, Max Wedge Super Victor Manifold, Dominator 1050 Carb, 1.6 roller Rockers, mechanical rollers, 2" Hooker Fenderwells, Pat Blais 727, 4.11 Gears, 10.5 x 29" Hoosiers. Just getting back into racing after 15 years. I would appreciate your Cam selection recommendations, and welcome any advice on the build. Much appreciated. Thank you

BHB4408 said
Help with Cam Selection on 440 Dart? I have a race only 72 Dodge Dart, 3200 lbs with driver. I am building a 40 Over 440 with a 512 Stroker Rotating Assembly from 440 Source including their lightweight crankshaft, Trickflow 270 Heads, 10.8 Compression, Max Wedge Super Victor Manifold, Dominator 1050 Carb, 1.6 roller Rockers, mechanical rollers, 2" Hooker Fenderwells, Pat Blais 727, 4.11 Gears, 10.5 x 29" Hoosiers. Just getting back into racing after 15 years. I would appreciate your Cam selection recommendations, and welcome any advice on the build. Much appreciated. Thank you,

What kind of service intervals do you want? Depending on the rockers you're using that will narrow your choices for a cam. For a 3 speed drag car you'll want the stall about 600 RPM below peak power. If you're using their best spring package 270 heads then you can get a pretty decent cam.