Help Please! Sagging Front end, can't adjust Ride Height at all.

Just had a valiant here with the same problem. The cage was installed with the car un an unlevel surface and the down tubes were holding the chassis crooked. That is on thing to check.


One other thing to check easily done is, Jack the car up in the center of the rear and level the front with the adjustment bolts. the bolts are very seldom the same when leveling the front of the car.

look how far this car was when arriving to be fixed. With no engine in the car and sitting on a level floor you could spin the right front wheel while the left was on the ground. This was done at a chassis race shop in Easton Pa. MCR. They do all there work on the lift or floor. They don't have chassis table.

100_0038.JPG

100_0039 (2).JPG

100_0052.JPG

100_0053 (2).JPG