Help Please! Sagging Front end, can't adjust Ride Height at all.

Why would you install the t bar into the LCA without the spindle/UCA installed? That is what limits the travel upon install. And as Demonracer said, I let them hang down as far as the suspension will travel. I also clearance the frame to the tubular UCA can travel further. That is what hangs up the suspension on my GTS. UCA to frame rail interference, then ball joint operating angle gets maxed out.


I would guess you simply have a faulty torsion bar. Other worn parts may be discovered as the suspension is disassembled. FWIW the GTS has the original torsion bars that is was born with (.890?). I tried a used set of small block bars and has similar results to what you are describing. I have tossed several bad bars over the years for this reason.