I have front disc brake issue, front spindle mounting bolt hitting sway bar mount on MBM disc brake kit? Need your help

I have 100 percent same kit issue and car as the photos enclosed from other user why i didnt need to elaborate its a 100 percent identical issue. With that said i will answer you anyways.

I have a 1971 Dodge Demon 340 that came as a factory sway bar car with mounting tabs on the lower control arms. The disc brake kit for the front is a MBM big bolt pattern 73-76 kit. If you refer to my photo in my previous post, when i turn the steering wheel in either direction I get about half the turn radius i should because the spindle mounting bolt hits it side of the mounting tab stopping the movement, as evident by the photo. My question is I cant be the only one with the issue besides the other gentleman who I messaged, but his post was in 2021 and he doesnt say how he fixed the issue, other then stating he resolved the issue. I reached out to him but not sure if he is still an active member getting alerts. So I am looking for someone who knows how to get around that tab, either shortened bolt or different size etc.