Thermoquad idling issues
An update. I rebuilt a nice untouched 6322s, Phenolic body looked perfect. Installed some 137 secondary jets, 95 primary with 1966 rods. Idling issues have been resolved. Starts with the touch of the key after sitting for an hour and doesn’t run extremely rich at an idle.
I also installed a ME Wagner adjustable PCV valve. I highly recommend if you can swing the cost. Everything was marked in little bags, came with extra screws and hex wrenches. In depth instructions. Seems to have taken care of my huge vacuum leak with a normal PCV and 10 inches of vacuum.
The Thermoquad has a small stumble when the secondaries open. So I need to play with the secondary door spring and see if I can take care of that.
Now it’s on to finding a Choke for the LD340 intake it’s on
An update. I rebuilt a nice untouched 6322s, Phenolic body looked perfect. Installed some 137 secondary jets, 95 primary with 1966 rods. Idling issues have been resolved. Starts with the touch of the key after sitting for an hour and doesn’t run extremely rich at an idle.
I also installed a ME Wagner adjustable PCV valve. I highly recommend if you can swing the cost. Everything was marked in little bags, came with extra screws and hex wrenches. In depth instructions. Seems to have taken care of my huge vacuum leak with a normal PCV and 10 inches of vacuum.
The Thermoquad has a small stumble when the secondaries open. So I need to play with the secondary door spring and see if I can take care of that.
Now it’s on to finding a Choke for the LD340 intake it’s on
