Help - Adjusting ‘67 904 console floor shifter
Sorry, this is not rocket science
Set it up like this photo.
Check that blue arms are parallel at some point in the travel, photo looks like drive or neutral.
Green shows the adjustment points
Red A - with the linkage removed from the trans arm MEASURE from a fixed point on the body how far the trans shift lever moves from park to low
Do the same for Red B
They should have the same travel.
Also note that the lever on the top (circled in green) is a bit less than parallel to the lower levels in this position
Yours do not have the same travel
This is all a mechanical advantage problem
Sorry, this is not rocket science
Set it up like this photo.
Check that blue arms are parallel at some point in the travel, photo looks like drive or neutral.
Green shows the adjustment points
Red A - with the linkage removed from the trans arm MEASURE from a fixed point on the body how far the trans shift lever moves from park to low
Do the same for Red B
They should have the same travel.
Also note that the lever on the top (circled in green) is a bit less than parallel to the lower levels in this position
Yours do not have the same travel
This is all a mechanical advantage problem
