MP DISTRIBUTOR TIMING CURVE 340

CFD,
Post #30. Congrats!!! That is EXACTLY how you find the correct amount of idle timing.
Now for the next step:
- you can use any combination of MVA + init to get the 25* [ eg, 5 +20, 15 + 10, etc ]
- do not go less than 25*, but a few degrees more will not hurt.
- if the centri curve in the dist is ok, you can probably use the factory init [ static ] timing & not touch the dist.
- make sure you use an adj VA unit. Check that timing is steady at idle.