Dyson alien fan...
Dyson HP04 Hot + Cool filter fan. the ones that have a big hoop on top with no blades. For $400 this doesn't move alot of air but it does heat, and filter the air through 4 filters, 2 HEPA and 2 charcoal. My neighbor gave it to me instead of throwing it away as the motor was making a bad rattle and throwing a ! code and turning off. After an hour I finally figured out to take it apart. This is some hi tech ****! All the screws are 2 TORX sizes and the motor is suspended in a 6 spring suspension basket. It basically sucks air in and forces it up into the hoop like a vacuum, through the 2 filters and then spits it out the slot on the hoop. No blades to get your kids fingers. Id give it about a 7 (10 hardest) to take apart and put back together as that suspension is a ***** to get back in without the springs popping out. I go tthe 2 of 3 screws that backed out of the motor back in with locktite and reassembled and it now works. TIP: there is a magnet on top that holds the remote and the little display is kinda cool as it tells you the level of filtration (probably just measures fan speed off a target RPM)
.
Dyson HP04 Hot + Cool filter fan. the ones that have a big hoop on top with no blades. For $400 this doesn't move alot of air but it does heat, and filter the air through 4 filters, 2 HEPA and 2 charcoal. My neighbor gave it to me instead of throwing it away as the motor was making a bad rattle and throwing a ! code and turning off. After an hour I finally figured out to take it apart. This is some hi tech ****! All the screws are 2 TORX sizes and the motor is suspended in a 6 spring suspension basket. It basically sucks air in and forces it up into the hoop like a vacuum, through the 2 filters and then spits it out the slot on the hoop. No blades to get your kids fingers. Id give it about a 7 (10 hardest) to take apart and put back together as that suspension is a ***** to get back in without the springs popping out. I go tthe 2 of 3 screws that backed out of the motor back in with locktite and reassembled and it now works. TIP: there is a magnet on top that holds the remote and the little display is kinda cool as it tells you the level of filtration (probably just measures fan speed off a target RPM)
.
