1968 Dodge Dart Western Sport Special Restoration
This weekend I took down the passenger side rear 1/4 panel to bare metal, had less holes drilled in it but much thicker body filler then the drivers side also had a patch panel made in the rear lower section. I wanted to see if that can be replaced with a new piece and remove the piece that was made there. Has some open weld seams.
This weekend I took down the passenger side rear 1/4 panel to bare metal, had less holes drilled in it but much thicker body filler then the drivers side also had a patch panel made in the rear lower section. I wanted to see if that can be replaced with a new piece and remove the piece that was made there. Has some open weld seams.
