245/60/14 on stock rally wheels

I have been using 245-60-14s on my 3 1970 Darts for 30 years. One of them uses stock 5.5 inch rallye rims with an unaltered rear suspension. perhaps 70,000 miles this way and 3 sets of BFG TA radials. Never had any issues, despite the howling of some folks here that my demise is imminent.

The other 2 Darts use 14x7 inch aftermarket rallyes out back that have the additional 1.5 inches of rim in the inside of the rim. I wanted the rims to look the same from the outside front to back. This was only possible by using a 3/4 inch spring relocation kit. Mine were both Mopar Performance kits although there are other versions out there. Again no issues despite many tens of thousands of miles on one of the cars (this one too ran 245-60-14s on stock rims with stock leaf location for over a decade and many many miles before the conversion).

The tires are tight in both set ups - I wouldn't do this if I were doing handling competitions.

By the way, I also use 205-70-14s up front as they are the closest 70 series in terms of sidewall height. I have never had fitment issues, but tried 215s and had to do some front fender adjustments (front lip strut).