Front suspension height

Good Lord, you guys are an amazing catalog of information. Just took the measurement and it is indeed 7.25". I just did a static alignment on it because I was suddenly enlightened on how that could alter the clearance. I set the camber while favoring the caster back as much as I could.

As far as the height, I measured the height to the center of the spindle cap when I had taken the pics posted above with the full weight of the car on it. I thought the nose sat too high, especially since The rear in on jackstands and likely 4 inches higher than it will be when I set it down with 275/60's on it. When I took the adjustable supports out and set the LCA's on them the spindles were really close to that height, give or take... I do know that these sit kind of low in the rear and I'm not a fan; never was, but I have stock shocks on it now and don't want to go with air shocks ever again.